JC106B HP FlexFabric 5820X-14XG-SFP+ Switch (New)

$0.00

Condition: NEW

Availability: Sorry, No Longer Available

HPE FlexFabric 5820X-14XG-SFP+ Switch - 2 interface slots & 1 OAA Slot Switch - 14 x SFP+ 10GbE, 4 x RJ-45 auto-negotiating 10/100/1000 ports, 2 x extended module slots, 1 open module slot (JC106B)

HP 5820 Switch Series supports advanced features that deliver a unique combination of unmatched 10 Gigabit Ethernet; high-availability architecture; full Layer 2/3 dual-stack IPv4/IPv6; and line-rate, low-latency performance on all ports. Extensible embedded application capabilities enable these switches to integrate services into the network, consolidating devices and appliances to simplify deployment and reduce power consumption as well as rack space.

Extremely versatile, the switches can be used in high-performance, high-density building or department cores as part of a consolidated network; for data center top-of-rack server access; or as high-performance Layer 3, 10GbE aggregation switches in campus and data center networks.

General
Device Type Switch - 14 ports - L3 - managed - stackable
Enclosure Type Rack-mountable 2U
Subtype 10 Gigabit Ethernet
Ports 14 x 10 Gigabit SFP+ + 4 x 10/100/1000
Performance Throughput (64-byte packet size): 363 Mpps ¦ Routing/switching capacity: 488 Gbps ¦ Latency (64-byte packets): 2.02 µs
Capacity IPv4 routing table entries: 12000
MAC Address Table Size 32K entries
Routing Protocol OSPF, BGP-4, IS-IS, RIP-1, RIP-2, BGP, IGMPv2, IGMP, VRRP, OSPFv2, PIM-SM, static IP routing, PIM-DM, IGMPv3, OSPFv3, PIM-SSM, MSDP, VRRPE, policy-based routing (PBR), RIPng, MLDv2, MLD, IS-ISv6, BGP-4+
Remote Management Protocol SNMP 1, SNMP 2, RMON 1, Telnet, SNMP 3, SNMP 2c, HTTPS, SSH, CLI
Encryption Algorithm PKI
Authentication Method Secure Shell (SSH), RADIUS, TACACS, Secure Shell v.2 (SSH2), HWTACACS
Features Flow control, layer 3 switching, layer 2 switching, DHCP support, auto-negotiation, ARP support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, DoS attack prevention, packet filtering, port mirroring, Weighted Round Robin (WRR) queuing, store and forward, IPv6 support, full duplex mode, Weighted Fair Queuing (WFQ), Weighted Random Early Detection (WRED), sFlow, DHCP snooping, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, DHCP server, MLD snooping, Equal-Cost Multipath (ECMP), Bidirectional Forwarding Detection (BFD), Unicast Reverse Path Forwarding (URPF), IPv4 support, Deficit Weighted Round Robin (DWRR), LLDP support, Link Aggregation Control Protocol (LACP), Port Security, NTP time synchronization, port isolation
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.1x, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ag, IEEE 802.1ab (LLDP)
RAM 2 GB SDRAM
Flash Memory 512 MB
Expansion / Connectivity
Interfaces 4 x 1000Base-T - RJ-45 ¦ 1 x console - RJ-45 - management ¦ 14 x 10Gbit LAN - SFP+
Expansion Slots 2 (total) / 2 (free) x expansion slot ¦ 1 (total) / 1 (free)
Power
Power Device Internal power supply
Installed Qty 2 (max)
Voltage Required (50/60 Hz)
Miscellaneous
Compliant Standards FCC Class A certified, ETSI, CISPR 22 Class A, GOST, EN 61000-3-2, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11, NOM, VCCI Class A ITE, EN 61000-3-3, EN55024, EN55022 Class A, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, EMC, ICES-003 Class A, EN 61000-4-5, EN 61000-4-11, RoHS, FCC CFR47 Part 15, EN300-386, EN 61000-4-8, UL 60950-1, IEC 60950-1, EN 60950-1, ANATEL, FDA, EN 60825-1, CAN/CSA C22.2 No. 60950-1, ANSI C63.4-2003, EN 60825-2
Dimensions & Weight
Width 17.3 in
Depth 18.4 in
Height 3.4 in
Weight 33.29 lbs
Environmental Parameters
Min Operating Temperature 32 °F
Max Operating Temperature 113 °F
Humidity Range Operating 10 - 90% (non-condensing)