WS-C3560E-48PD-E Cisco Catalyst 3560E Network Switch (New)

$8,997.00
Brand: Cisco
SKU: WS-C3560E-48PD-E

Condition: NEW

Availability: End Of Life - Inventory May Be Limited

Cisco 3560E Ethernet Switch - 48 port switch - 48 x 10/100/1000Base-T (WS-C3560E-48PD-E)

Enhance productivity and protect your investment as the network evolves and application requirements increase. The Cisco Catalyst 3560-E Series is an enterprise-class line of standalone access and aggregation switches that ease the deployment of secure converged applications. Combining 10/100/1000 and Power over Ethernet (PoE) configurations with uplinks that easily upgrade from 1 Gigabit Ethernet to 10 Gigabit Ethernet, these switches enhance worker productivity by enabling applications such as IP telephony, wireless, and video. Cisco Catalyst 3560-E Series aggregation switches deliver secure highly available unified network services and versatile connectivity in a one rack-unit (1-RU) form factor for space and power constrained environments, enabling businesses to reduce total cost of ownership while maximizing investment protection.

General
Device Type Switch - 48 ports - L3 - managed
Enclosure Type Rack-mountable 1U
Subtype Gigabit Ethernet
Ports 48 x 10/100/1000 (PoE) + 2 x X2
Power Over Ethernet (PoE) PoE
Performance Switching capacity: 128 Gbps
Capacity Virtual interfaces (VLANs): 1000 ¦ Switched virtual interfaces (SVIs): 1000
MAC Address Table Size 12K entries
Jumbo Frame Support 9216 bytes
Routing Protocol OSPF, BGP-4, RIP-1, RIP-2, EIGRP, HSRP, DVMRP, PIM-SM, static IP routing, PIM-DM, EIGRP for IPv6, OSPFv3, PIM-SSM, policy-based routing (PBR), RIPng
Remote Management Protocol SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, SSH
Authentication Method Kerberos, Secure Shell (SSH), RADIUS, TACACS+
Features Full duplex capability, layer 3 switching, layer 2 switching, auto-sensing per device, DHCP support, power over Ethernet (PoE), auto-negotiation, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, traffic shaping, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping, Dynamic ARP Inspection (DAI)
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s
RAM 128 MB
Flash Memory 64 MB flash
Status Indicators Port transmission speed, port duplex mode, bandwidth utilization %, power, link OK, system, link/activity
Expansion / Connectivity
Interfaces 48 x 1000Base-T RJ-45 PoE ¦ 1 x console RJ-45 management ¦ 1 x 100Base-TX RJ-45 management ¦ 2 x 10Gb Ethernet - X2
Power
Power Device Internal power supply
Voltage Required AC 120/230 V (50/60 Hz)
Features Redundant Power System (RPS) connector
Miscellaneous
MTBF 151,196 hours
Compliant Standards FCC Class A certified, TUV GS, CISPR 22 Class A, GOST, BSMI CNS 13438 Class A, cUL, NOM, VCCI Class A ITE, EN55022 Class A, CB, AS/NZS 60950-1, AS/NZ 3548 Class A, CCC, FCC Part 15, MIC, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1
Software / System Requirements
Software Included Cisco IOS IP Services
Dimensions & Weight
Width 17.5 in
Depth 17.4 in
Height 1.8 in
Weight 19.4 lbs
Environmental Parameters
Min Operating Temperature 32 °F
Max Operating Temperature 113 °F
Humidity Range Operating 0 - 95%