Description
Condition: NEWAvailability: End Of Life - Inventory May Be Limited
Last Day Of Support: October 31, 2021
Cisco ONE Nexus 3548X Switch - L3 - managed - 48 x SFP+ - rack-mountable (C1-N3K-C3548X)
The Cisco Nexus 3548x switches are compact 1RU form-factor 10 Gigabit Ethernet switches providing line-rate Layer 2 and 3 switching with ultra-low latency. In addition, they consume little power. These switches introduce powerful hardware-based multicast NAT and latency monitoring capabilities and a second USB port for easier manageability.
| Device Type | Switch - 48 ports - L3 - managed |
| Enclosure Type | Rack-mountable 1U |
| Subtype | 10 Gigabit Ethernet |
| Ports | 48 x SFP+ |
| Performance | Switching capacity: 960 Gbps å? Forwarding performance: 720 Mpps |
| Capacity | Virtual interfaces (VLANs): 4096 å? Multiple Spanning Tree Protocol instances: 64 å? Rapid Spanning Tree Protocol instances: 512 å? ACL entries: 4096 å? IPv4 routes (Unicast): 24000 å? IPv4 hosts: 64000 å? IPv4 routes (Multicast): 8000 å? OSPF routes: 256 |
| MAC Address Table Size | 64K entries |
| Jumbo Frame Support | 9216 bytes |
| Routing Protocol | OSPF, RIP-2, HSRP, VRRP, OSPFv2, static IP routing, ECMP, CIDR |
| Remote Management Protocol | SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SSH-2, CLI |
| Encryption Algorithm | MD5, AES |
| Authentication Method | RADIUS, TACACS+, MS-CHAP, Secure Shell v.2 (SSH2) |
| Features | Flow control, NAT support, BOOTP support, ARP support, trunking, VLAN support, Syslog support, Broadcast Storm Control, Multicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, EIGRP Stub Routing, STP Root Guard, Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), DHCP relay, NTP time synchronization, STP PortFast, Class of Service (CoS), Precision Time Protocol (PTP), 18MB packet buffer |
| Compliant Standards | IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3ba, IEEE 802.1AX, IEEE 1588-2008 |
| Flash Memory | 2 GB |
| Interfaces | 1 x serial (console) RJ-45 å? 1 x management (Gigabit LAN) RJ-45 å? 48 x Gigabit / 10Gbit LAN SFP+ å? 2 x USB Type A |
| Power Device | Internal power supply - hot-plug |
| Installed Qty | 2 (installed) / 2 (max) |
| Power Redundancy | Yes |
| Power Redundancy Scheme | 1+1 |
| Power Provided | 400 Watt |
| Voltage Required | AC 120/230 V (50/60 Hz) |
| Power Consumption Operational | 213 Watt |
| MTBF | 317,030 hours |
| Compliant Standards | CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, RoHS, UL 60950-1 Second Edition, GB 4943, Directive 2004/108/EC, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, Directive 2006/95/EC, VCCI Class A, KN24, KN22 Class A, EN 300386 |
| Software Included | Cisco NX-OS |
| Width | 17.3 in |
| Depth | 18.4 in |
| Height | 1.7 in |
| Weight | 17.42 lbs |
| Min Operating Temperature | 32 å¡F |
| Max Operating Temperature | 104 å¡F |
| Humidity Range Operating | 10 - 85% (non-condensing) |
| Min Storage Temperature | -40 å¡F |
| Max Storage Temperature | 158 å¡F |
| Humidity Range Storage | 5 - 95% (non-condensing) |
