CISCO887-K9 Cisco 887 Router (New)

Cisco

SKU:
CISCO887-K9
Condition:
New
Width:
18.00 (in)
Height:
8.00 (in)
Depth:
18.00 (in)
$327.00
4 people looking at this.

Description

Condition: NEW
Availability: Inventory Available - But May Be Limited

Cisco 800 Series Router - Integrated Services Router - 1 x ADSL2/2+ over basic telephone service WAN, 4 x 10-/100-Mbps Managed Switch LAN (CISCO887-K9)

Cisco 880 series integrated services routers are fixed-configuration routers that provide collaborative business solutions for secure voice and data communication to small businesses and enterprise teleworkers. In addition, the web-based Cisco configuration professional configuration tool simplifies setup and deployment. Centralized management capabilities give network managers visibility and control of the network configurations at the remote site.

General
Device Type Router - 4-port switch (integrated)
Enclosure Type Desktop
Connectivity Technology Wired
Data Link Protocol Ethernet, Fast Ethernet
Capacity IPSec VPN tunnels: 20
Network / Transport Protocol L2TP, IPSec, PPPoE, PPPoA, FTP, DHCP, DNS, L2TPv3, DDNS
Routing Protocol OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, PIM-SM, GRE
Remote Management Protocol Telnet, SNMP 3, HTTP, HTTPS, SSH
Encryption Algorithm LEAP, DES, Triple DES, SSL, PEAP, TKIP, PKI, 128-bit AES, 192-bit AES, 256-bit AES
Authentication Method RADIUS, TACACS+
Features NAT support, VPN support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, Stateful Packet Inspection (SPI), content filtering, DiffServ support, MAC address filtering, IPv6 support, High Availability, Intrusion Prevention System (IPS), URL filtering, Stateful Failover, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), Dynamic Multipoint VPN (DMVPN), WAN failover, DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), DNS proxy, Bidirectional Forwarding Detection (BFD)
Compliant Standards IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x, CISPR 24, EN 61000-3-2, EN55022, ICES-003, EN 61000-3-3, EN55024, CISPR 22, EN50082-1, EN55022 Class B, ICES-003 Class B, EN 61000-6-1, AS/NZ 3548 Class B, EN 60555-2, FCC CFR47 Part 15, EN300-386, FCC CFR47 Part 15 B, VCCI V-3
RAM 256 MB (installed) / 768 MB (max)
Flash Memory 128 MB
Status Indicators Port status, power
Communications
Type ISDN / DSL modem combo
Digital Signaling Protocol ADSL2+
Protocols & Specifications ITU G.992.1 (G.DMT) Annex A, ITU G.992.3 Annex A, ITU G.992.5 Annex A
Expansion / Connectivity
Interfaces LAN: 4 x 10Base-T/100Base-TX - RJ-45 å? Management: 1 x RJ-45 å? WAN: 1 x ADSL2+ å? USB: 1 x 4 pin USB Type A å? WAN: 1 x BRI ST
Power
Power Device External power adapter - 60 Watt
Voltage Required AC 120/230 V (50/60 Hz)
Software / System Requirements
OS Provided Cisco IOS Advanced Security
Dimensions & Weight
Width 12.8 in
Depth 9.8 in
Height 1.7 in
Weight 5.51 lbs
Environmental Parameters
Min Operating Temperature 32 å¡F
Max Operating Temperature 104 å¡F
Humidity Range Operating 10 - 85% (non-condensing)

Extra Information

Brand:
Cisco
Width:
18.00 (in)
Height:
8.00 (in)
Depth:
18.00 (in)