Description
Condition: REFURBISHEDAvailability: End Of Life - Inventory May Be Limited
Last Day Of Support: October 31, 2021
Cisco Nexus 7000 Ethernet Module - 32-Port 10 Gigabit with XL Option - Switch - 32 x 10 Gigabit SFP+ - plug-in module (N7K-M132XP-12L)
The Cisco Nexus 7000 Series 32-Port 10 Gigabit Ethernet Module with XL Option is a highly scalable high-performance module designed for mission-critical Ethernet networks. The module uses the M1-XL forwarding engine that features a larger Forwarding Information Base (FIB). The module also supports Small Form Factor Pluggable Plus (SFP+) transceivers, allowing deployment flexibility in various types of networking environments.
The Cisco Nexus 7000 series switches comprise a modular data center - class product line designed for highly scalable 10 Gigabit Ethernet networks with a fabric architecture that scales beyond 15 terabits per second (Tbps), providing support for future 40 and 100 Gigabit Ethernet interfaces. Designed to meet the requirements of the mission-critical network environments, it delivers continuous system operation and virtualized pervasive services. The Cisco Nexus 7000 series is based on a proven operating system, with enhanced features to deliver real-time system upgrades with exceptional manageability and serviceability. Its innovative unified fabric design is purpose - built to support consolidation of IP, storage, and interprocess communication (IPC) networks on a single Ethernet fabric.
The Cisco Nexus 7000 32-Port 10 Gigabit Ethernet Module with XL Option has a number of key features that are designed to enable flexible deployment and support for environments requiring the high performance environments and rich features. With a scalable feature license, the module can operate in the enhanced XL mode, which enables utilization of the full forwarding table, essential for large-scale deployments such as Internet peering environments. This larger FIB table can support multiple copies of the full Internet route table for use in Internet-facing deployments with Virtual Routing and Forwarding (VRF) and virtual device context (VDC) support. The ability makes this module extremely flexible for many types of networking environments, without requiring a hardware module change or upgrade, and delivers a lower total cost of ownership (TCO). The fabric interface on the 32-port module delivers 80Gbps of bandwidth in each direction.
| Device Type | Switch - 32 ports |
| Enclosure Type | Plug-in module |
| Subtype | 10 Gigabit Ethernet |
| Compatible Slots | 1 x expansion slot |
| Ports | 32 x 10 Gigabit SFP+ |
| Performance | Switching capacity: 80 Gbps |
| Capacity | IPv4 routes: up to 1000000 å? IPv6 routes: up to 350000 å? NetFlow entries: 512000 å? ACL: 128000 |
| MAC Address Table Size | 128K entries |
| Jumbo Frame Support | 9216 bytes |
| Encryption Algorithm | 128-bit AES |
| Features | MPLS support, VLAN support, IPv6 support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, Deficit Weighted Round Robin (DWRR), Shaped Round Robin (SRR) |
| RAM | 2 GB |
| Status Indicators | Port status, link OK, status, link/activity |
| Interfaces | 32 x 10Gb Ethernet - SFP+ |
| MTBF | 50,081 hours |
| Compliant Standards | NEBS level 3, CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, VCCI Class A ITE, EN 61000-3-3, EN55024, EN55022 Class A, ICES-003 Class A, FCC CFR47 Part 15, EN300-386, UL 60950-1, IEC 60950-1, EN 60950-1, EN 60601-1-2, GB 4943 |
| Width | 15.3 in |
| Depth | 21.9 in |
| Height | 1.7 in |
| Weight | 16.98 lbs |
| Min Operating Temperature | 32 å¡F |
| Max Operating Temperature | 104 å¡F |
| Humidity Range Operating | 5 - 90% (non-condensing) |
| Min Storage Temperature | -40 å¡F |
| Max Storage Temperature | 158 å¡F |
| Humidity Range Storage | 5 - 95% (non-condensing) |
