Description
Condition: NEW
Availability: Inventory Available - May Be Limited
Cisco Catalyst 9500 Switch - 16 x 10 Gigabit Ethernet and 2 x 40GE Network Module - Network Advantage License (C9500-16X-2Q-A)
The Cisco Catalyst 9500 Series Switches are the next generation of enterprise-class core and aggregation layer switches, supporting full programmability and serviceability. Based on an x86 CPU, the Catalyst 9500 Series is Cisco's lead purpose-built fixed core and aggregation enterprise switching platform, built for security, IoT, and cloud. The Catalyst 9500 Series is the industry's first purpose-built 40 Gigabit Ethernet line of switches targeted for the enterprise campus.
| Device Type | Switch - 16 ports - L3 - managed - stackable |
| Enclosure Type | Rack-mountable 1U |
| Subtype | 10 Gigabit Ethernet |
| Ports | 16 x 10 Gigabit Ethernet + 2 x 10 Gigabit SFP+ + 2 x 40 Gigabit QSFP+ |
| Performance | Switching capacity (full duplex): up to 480 Gbps å? Forwarding rate: up to 360 Mpps |
| Capacity | Indirect IPv4 routes: 64000 å? Host IPv4 routes: 80000 å? Indirect IPv6 routes: 32000 å? Host IPv6 routes: 40000 å? Multicast scale: 16000 å? QoS ACL scale: 18000 å? Security ACL scale: 18000 å? FNF entries: 512000 å? VLAN IDs: 4000 å? Switched virtual interfaces (SVIs): 4000 |
| MAC Address Table Size | 64K entries |
| Jumbo Frame Support | 9198 bytes |
| Routing Protocol | OSPF, RIP-1, RIP-2, IGMP, VRRP, PIM-SM, PIM-SSM, policy-based routing (PBR), RIPng |
| Remote Management Protocol | SNMP 1, RMON 1, RMON 2, SNMP, SNMP 3, TFTP, NETCONF, RESTCONF |
| Encryption Algorithm | 256-bit AES |
| Features | DHCP support, NAT support, PAT support, trunking, MPLS support, Non-Stop Forwarding (NSF), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Random Early Detection (WRED), Spanning Tree Protocol (STP) support, Virtual Route Redundancy Protocol (VRRP) support, Access Control List (ACL) support, Quality of Service (QoS), Non-Stop Routing (NSR), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Remote Switch Port Analyzer (RSPAN), Hot Standby Router Protocol (HSRP) support, Virtual Routing and Forwarding (VRF), Maximum Likelihood Demodulation (MLD), Flexible NetFlow (FNF), Multicast Source Discovery Protocol (MSDP), MACsec support, integrated Wireshark, VLAN Double Tagging (Q-in-Q), Ethernet over MPLS (EoMPLS), Hierarchical Virtual Private LAN Service (H-VPLS), Private VLAN, Layer 3 VPN (L3VPN) support, CoAP support, Switched Port Analyzer (SPAN) |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ae, IEEE 802.3ba |
| Processor | 1: 2.4 GHz |
| RAM | 16 GB |
| Flash Memory | 16 GB |
| Built-in Devices | RFID tag |
| Status Indicators | Status |
| Interfaces | 16 x 10Gbit LAN RJ-45 å? 2 x 10GBase-X SFP+ å? 2 x 40GBase-X QSFP+ |
| Power Device | Internal power supply - hot-plug |
| Installed Qty | 2 (installed) / 2 (max) |
| Power Redundancy | Yes |
| Power Provided | 950 Watt |
| Voltage Required | AC 120/230 V (50 - 60 Hz) |
| Features | Front-to-rear airflow |
| MTBF | 315,790 hours |
| Compliant Standards | CISPR 22 Class A, CISPR 24, EN55024, EN55022 Class A, EN50082-1, EN 61000-6-1, AS/NZS 60950-1, ICES-003 Class A, UL 60950-1, IEC 60950-1, EN 60950-1, GB 4943, VCCI Class A, KN24, KN22 Class A, EN 300386, AS/NZS CISPR22:2004 Class A, EN61000-3-2, EN61000-3-3, FCC CFR47 Part 15 A, CNS 13438 Class A, KN 61000-4, CAN/CSA-C22.2 No. 60950-1 |
| Software Included | Cisco IOS Universal |
| Width | 1.7 in |
| Depth | 17.5 in |
| Height | 21.5 in |
| Weight | 23.59 lbs |
| Min Operating Temperature | 32 å¡F |
| Max Operating Temperature | 104 å¡F |
| Humidity Range Operating | 5 - 90% (non-condensing) |
| Min Storage Temperature | -4 å¡F |
| Max Storage Temperature | 149 å¡F |
| Humidity Range Storage | 5 - 95% (non-condensing) |
