C9800-40-K9 Cisco Catalyst 9800-40 Wireless Controller (Refurb)

Cisco

SKU:
C9800-40-K9-RF
Condition:
Refurbished
Width:
17.30 (in)
Height:
19.50 (in)
Depth:
1.72 (in)
$4,477.00
2 people looking at this.

Description

Condition: REFURBISHED
Availability: Inventory Available - But May Be Limited

Cisco Catalyst 9800-40 Wireless Controller - Network management device - four data ports which can operate in either 10G or 1G mode - accommodates up to 2,000 access points and 32,000 clients - Up to 40 Gbps throughput - Aironet 802.11ac Wave 1 and Wave 2 access points, Cisco Catalyst 9100 802.11ax access points - rack-mountable (C9800-40-K9)

Built from the ground-up for intent-based networking and Cisco DNA, Cisco Catalyst 9800 Series Wireless Controllers are Cisco IOS XE based and integrate the RF excellence of Cisco Aironet access points, creating a best-in-class wireless experience for your evolving and growing organization. The 9800 Series is built on an open and programmable architecture with built-in security, streaming telemetry, and rich analytics.

The Cisco Catalyst 9800 Series Wireless Controllers are built on the three pillars of network excellence--always on, secure, and deployed anywhere--which strengthen the network by providing the best wireless experience without compromise, while saving time and money.

The Cisco Catalyst 9800-40 is a fixed wireless controller with seamless software updates for midsize and large enterprises. It is feature rich and enterprise ready to power your business-critical operations and transform end-customer experiences

Device Type Network management device
Height (Rack Units) 1U
Width 17.3 in
Depth 19.5 in
Height 1.7 in
Weight 22.8 lbs
Processor / Memory / Storage
Hard Drive SSD 240 GB
Networking
Form Factor Rack-mountable
Connectivity Technology Wireless, wired
Data Link Protocol Gigabit Ethernet, 10 Gigabit Ethernet, IEEE 802.11ac Wave 2, IEEE 802.11ac Wave 1
Network / Transport Protocol TCP/IP, UDP/IP, ICMP/IP, IPSec, ARP, BOOTP, DHCP, Bonjour
Routing Protocol CIDR
Remote Management Protocol SNMP 1, RMON, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH
Performance Throughput: 40 Gbps
Capacity Maximum number of access points: 2000 å? Maximum number of clients: å? Wireless LANs: 4096 å? VLANs supported: 4096
Status Indicators Power, system, HDD activity, link/activity
Features VLAN support, Syslog support, IPv6 support, SNTP support, Wi-Fi Multimedia (WMM) support, RADIUS support, CAPWAP support, Internet Control Message Protocol (ICMP), User Datagram Protocol (UDP), Datagram Transport Layer Security (DTLS)
Encryption Algorithm Triple DES, AES, IKE, SSL, TLS, WPA, WPA2, PKI, ESP, CRL, CCM, CCMP
Authentication Method RADIUS, Extensible Authentication Protocol (EAP)
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.11b, IEEE 802.11a, IEEE 802.11d, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.11h, IEEE 802.11e, IEEE 802.1ae, IEEE 802.11n, IEEE 802.11k, IEEE 802.1AX, IEEE 802.11w, IEEE 802.11r, IEEE 802.11u
Expansion / Connectivity
Interfaces 1 x console - RJ-45 å? 1 x management - RJ-45 å? 1 x USB - Type A å? 2 x USB - Type A å? 1 x redundancy å? 4 x 10Gb Ethernet - SFP+
Miscellaneous
Compliant Standards VCCI, EN 61000-3-2, EN55022, ICES-003, EN 61000-3-3, CISPR 22, EN50082-1, EN 61000-6-1, AS/NZS 60950-1, FCC CFR47 Part 15, AS/NZS CISPR 22, CNS 13438, EN 300 386, KN32, UL/CSA60950-1, IEC/EN 61000-4-3, IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-6, IEC/EN 61000-4-8, IEC/EN 61000-4-11, IEC/EN 61000-4-2, EN 55032, IEC/EN 60950-1, CAN/CSA-C22.2 No. 60950-1, IEEE 802.3, IEEE 802.1x
Power
Power Device Internal power supply - hot-plug
Max Supported Qty 2
Power Redundancy Yes
Voltage Required AC 120/230 V (50/60 Hz)
Power Consumption Operational 381 Watt
Power Provided 1100 Watt
Environmental Parameters
Min Operating Temperature 41 å¡F
Max Operating Temperature 104 å¡F
Humidity Range Operating 5 - 85% (non-condensing)

Extra Information

Brand:
Cisco
Width:
17.30 (in)
Height:
19.50 (in)
Depth:
1.72 (in)