Description
Condition: NEW — Brand new, factory-sealed unit. Manufacturer Part #: MS125-48LP-HW
Cisco Meraki MS125-48LP 48-Port PoE+ Gigabit Switch — 370 W PoE Budget, 4×10G SFP+ Uplinks, 1U Rack
The Cisco Meraki MS125-48LP equips 48 Gigabit access ports with PoE+ capability and a shared 370 W power budget, delivering sufficient headroom for mixed deployments of wireless access points and IP phones across a full 48-port access layer. Four 10G SFP+ uplinks provide high-speed fiber backhaul, and the fixed internal AC power supply simplifies installation in standard 1U rack environments. Meraki cloud management enables remote provisioning and unified policy control across all sites from a single dashboard. A Meraki enterprise license is required separately.
Technical Specifications
| Device Type | Managed Layer 2 PoE+ access switch, 52 total ports |
| Form Factor | 1U rack-mount |
| Ports | 48× 10/100/1000 Mbps RJ45 (PoE+) + 4× 10G SFP+ uplinks |
| Power over Ethernet (PoE) | PoE+ (IEEE 802.3at) |
| PoE Budget | 370 W |
| Switching Capacity | 176 Gbps |
| Management Protocols | Meraki cloud dashboard, SNMP |
| Key Features | Zero-touch provisioning, QoS (6 queues), VLAN support (4094 VLANs), RSTP/STP with BPDU Guard & Root Guard, DHCP snooping, IGMP snooping, LACP port aggregation, UDLD, 802.1x port-based access control, RBAC, port mirroring, Syslog, Voice VLAN, MAC forwarding table 16,000 entries, jumbo frames (9578 bytes) |
| Compliant Standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1w, IEEE 802.1x, IEEE 802.1ab (LLDP), IEEE 802.3ad (LACP), IEEE 802.3af, IEEE 802.3at |
| Input Power | AC 120/230 V, 47–63 Hz, fixed internal PSU |
| Dimensions (W×D×H) | 17.32 × 10.0 × 1.73 in |
| Weight | 9.26 lbs |
Best Used For
Optimized for branch and campus deployments where PoE+ power across 48 ports is required but total device count keeps average per-port draw well under 8 W — such as environments with a mix of standard 802.3af access points, VoIP phones, and low-power IoT sensors.
