Description
Condition: NEW — Brand new, factory-sealed unit. Manufacturer Part #: MS130-48-HW
Cisco Meraki MS130-48 48-Port Gigabit Switch — Fanless, 1U Rack Layer 2 Access Switch
The Cisco Meraki MS130-48 provides 48 × 1GbE RJ45 access ports and 4 × 1G SFP uplinks in a compact, fanless 1U rack chassis, making it one of the quietest high-density switches available for enterprise access deployments. Without PoE circuitry, the switch draws a remarkably low 28 W idle and 28 W maximum, keeping both power and cooling costs to a minimum. The 104 Gbps non-blocking switching fabric supports full line-rate forwarding on all 52 ports simultaneously. Management is entirely cloud-based through the Cisco Meraki dashboard, with automatic firmware upgrades and zero-touch provisioning.
Technical Specifications
| Device Type | Managed Layer 2 Gigabit Switch |
| Form Factor | 1U Rack Mount (integrated rack ears included) |
| Ports | 48 × 10/100/1000BASE-T (RJ45), 4 × 1G SFP (uplink), 1 × Dedicated Management (RJ45) |
| Power over Ethernet (PoE) | No PoE |
| PoE Budget | — |
| Switching Capacity | 104 Gbps |
| Management Protocols | Cisco Meraki Dashboard (cloud-managed), SNMP, Syslog, IPv4/IPv6 |
| Key Features | DHCP snooping, 802.1x authentication, 802.1Q VLAN tagging, QoS, DHCP relay, fanless operation, fixed internal PSU, non-blocking architecture, automatic firmware upgrades, remote packet capture, zero-touch provisioning (ZTP) |
| Compliant Standards | IEEE 802.1Q, IEEE 802.1x |
| Input Power | AC 100–240 V, 1.5–0.85 A, 50–60 Hz (fixed internal PSU) |
| Dimensions (W×D×H) | 17.32 × 10 × 1.73 in |
| Weight | 8.14 lb (3.69 kg) |
Best Used For
Well-suited for data center top-of-rack or enterprise access-layer deployments where a high port count, low noise, and low power draw are priorities, and end devices are powered by local AC outlets rather than PoE.
