WS-C3850-48XS-S Cisco Catalyst 3850 Network Switch (Refurb)

Cisco

SKU:
WS-C3850-48XS-S-RF
Condition:
Refurbished
Width:
17.50 (in)
Height:
1.80 (in)
Depth:
20.10 (in)
$1,727.00
6 people looking at this.

Description

Condition: REFURBISHED
Availability: Inventory Available - But May Be Limited

Cisco 3850 Ethernet Switch - 48 Ports - 48 x SFP+ and 4 QSFP+ Ethernet port, 750WAC front-to-back power supply, IP Base feature set (WS-C3850-48XS-S)

The Cisco Catalyst 3850 series is the next generation of enterprise-class stackable Ethernet and Multigigabit Ethernet access and aggregation layer switches that provide full convergence between wired and wireless on a single platform. Cisco's Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC) powers the switch and enables uniform wired-wireless policy enforcement, application visibility, flexibility and application optimization. This convergence is built on the resilience of the improved Cisco StackWise-480 technology. The Cisco Catalyst 3850 series Switches support full IEEE 802.3 at Power over Ethernet Plus (PoE+), Cisco Universal Power over Ethernet (Cisco UPOE), modular and field-replaceable network modules, RJ45 and fiber-based downlink interfaces, and redundant fans and power supplies. With speeds that reach 10Gbps, the Cisco Catalyst 3850 Multigigabit Ethernet Switches support current and next-generation wireless speeds and standards (including 802.11ac Wave 2) on existing cabling infrastructure.

General
Device Type Switch - 48 ports - L3 - managed - stackable
Enclosure Type Desktop, rack-mountable 1U
Subtype 10 Gigabit Ethernet
Ports 48 x 1 Gigabit / 10 Gigabit SFP+ + 4 x 40 Gigabit QSFP+ (uplink)
Performance Switching capacity: 1280 Gbps å? Stacking bandwidth: 480 Gbps
Capacity IPv4 routes: 24000 å? NetFlow entries: 96000 å? Virtual interfaces (VLANs): 4000 å? Switched virtual interfaces (SVIs): 1000
MAC Address Table Size 32000 entries
Jumbo Frame Support 9198 bytes
Routing Protocol OSPF, BGP-4, IS-IS, RIP-1, RIP-2, EIGRP, IGMPv2, IGMP, PIM-SM, PIM-DM, IGMPv3, EIGRP for IPv6, OSPFv3, PIM-SSM, policy-based routing (PBR), RIPng, MLDv2, MLD
Remote Management Protocol SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, TFTP, SSH, CLI
Authentication Method Kerberos, Secure Shell (SSH), RADIUS, TACACS+
Features DHCP support, ARP support, Syslog support, PIM snooping, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), SSH support, Virtual Route Forwarding-Lite (VRF-Lite), front to back airflow, Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), Energy Efficient Ethernet, Virtual Routing and Forwarding (VRF), Cisco StackWise-480 technology, Cisco StackPower technology, Flexible NetFlow (FNF), 802.1x authentication, radio resource management (RRM), ARP inspection, Weighted Tail Drop (WTD), VLAN Trunking Protocol (VTP), Bridge protocol data unit (BPDU), Control plane protection (CoPP)
Compliant Standards IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s
RAM 8 GB
Flash Memory 8 GB
Status Indicators Port transmission speed, port duplex mode, power, system, active, status
Expansion / Connectivity
Interfaces 48 x 10GBase-X SFP+ å? 4 x 40Gbit LAN QSFP+ uplink å? 1 x USB Type A å? 1 x management (mini-USB) Type B å? 1 x console RJ-45 management å? 1 x management (Gigabit LAN) RJ-45 å? 2 x network stack device
Power
Power Device Internal power supply
Installed Qty 1 (installed) / 2 (max)
Power Redundancy Optional
Power Redundancy Scheme 1+1 (with optional power supply)
Power Provided 750 Watt
Voltage Required AC 120/230 V (50 - 60 Hz)
Features Front-to-rear air?ow
Miscellaneous
MTBF 286,900 hours
Compliant Standards CISPR 22 Class A, CISPR 24, EN 61000-3-2, NOM, EN 61000-3-3, EN55024, EN50082-1, EN 61000-6-1, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, CCC, ICES-003 Class A, EN 61000-4-5, FCC CFR47 Part 15, UL 60950-1, IEC 60950-1, EN 60950-1, UL 60950-1 Second Edition, KCC, RoHS, FCC Part 15 A, AS/NZS 3548 Class A, BSMI Class A, CAN/CSA C22.2 No. 60950-1, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, KN24, KN22 Class A, EN 300386, AS/NZS CISPR 22, CNS 13438, EN 55022 Class A
Software / System Requirements
Software Included Cisco IOS IP Base
Dimensions & Weight
Width 17.5 in
Depth 20.1 in
Height 1.8 in
Weight 16.42 lbs
Environmental Parameters
Min Operating Temperature 23 å¡F
Max Operating Temperature 113 å¡F
Humidity Range Operating 10 - 95% (non-condensing)
Min Storage Temperature -40 å¡F
Max Storage Temperature 158 å¡F

Extra Information

Brand:
Cisco
Width:
17.50 (in)
Height:
1.80 (in)
Depth:
20.10 (in)