Product Overview
Condition: REFURBISHED
Manufacturer Part #: C9200L-48PL-4X-E
Cisco Catalyst 9200L Fixed Uplink Switch with base Network Essential license - stackable 48 ports partial PoE+ switch (48 x 1Gig PoE+ ports with partial PoE support with 4 x 10G SFP fixed uplinks) - has 2 FRU power supply module slots (ships with 1 default power supply); the default primary AC power supply is PWR-C5-600WAC - PoE budget of 370 watt using single primary PSU - there are 2 internal fixed fans - supports the StackWise-80 stacking option
Cisco 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides flexible downlink options with data, PoE+, UPOE, UPOE with mGig for Wi-Fi 6/6E, as well as open APIs of Cisco IOS XE and programmability of the UADP ASIC technology.
With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access.
Device Type: Switch - 48 ports - L3 - managed - stackable
Enclosure Type: Rack-mountable
Subtype: Gigabit Ethernet
Ports: 48 x 10/100/1000 (PoE+) + 4 x 10 Gigabit SFP+ (uplink)
Power Over Ethernet (PoE): PoE+
PoE Budget: 370 W
Performance: Stacking bandwidth: 80 Gbps | Switching capacity: 176 Gbps | Forwarding rate: 130.95 Mpps | Switching capacity with stacking: 256 Gbps | Forwarding rate with stacking: 190 Mpps
Capacity: Virtual networks: 1 | IPv4 routes: 11000 | IPv4 routing table entries: 3000 | IPv6 routing table entries: 1500 | Multicast scale: 1000 | ACL scale entries: 1500 | FNF entries: 16000 | VLANs supported: 1024 | Switched virtual interfaces (SVIs): 512 | QoS hardware queues per port: 8 | Packet buffer size: 6 MB
MAC Address Table Size: 16000 entries
Jumbo Frame Support: 9198 bytes
Routing Protocol: OSPF, RIP, RIP-1, RIP-2, EIGRP, VRRP, PIM-SM, EIGRP for IPv6, OSPFv3, PIM-SSM, policy-based routing (PBR), RIPng, MSTP
Remote Management Protocol: SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, CLI, NETCONF, RESTCONF, IPv4, IPv6, YANG
Features: Access Control List (ACL) support, Quality of Service (QoS), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), PXE support, Energy Efficient Ethernet, Class of Service (CoS), Flexible NetFlow (FNF), 802.1x authentication, DiffServ Code Point (DSCP) support, MACsec support, Control plane protection (CoPP), Blue Beacon LED, Zero-touch provisioning (ZTP), secure boot, Protocol Independent Multicast (PIM), First Hop Security (FHS), PVLAN support, Committed Information Rate (CIR), Cisco StackWise-80 technology, Cisco Trust Anchor module, Cisco Unified Access Data Plane (UADP) 2.0
Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3bz
Power: AC 100-240 V (50 - 60 Hz)
Power Redundancy: Optional
Dimensions (WxDxH): 17.5 in x 11.3 in x 1.7 in
Weight: 10.58 lbs
